ULXD4Q Quad-Channel Digital Wireless Receiver (G50: 470 to 534 MHz)
 |
From Shure
Availability: Item is currently available.
See more in Electronics
See more in Home Theater
Product Description
The ULXD4Q Quad-Channel Digital Wireless Receiver from Shure features 4 wireless channels with independent gain control, LED meters, and XLR outputs. It is tuned to Shure's G50 band and operates between 470 to 534 MHz. The ULXD4Q is capable of handling 24-bit/48 kHz audio and can provide AES-256-bit encryption to assure your wireless signal is kept secure.
The dual Ethernet ports allow multiple units to share RF signal as well as be networked together and controlled via Shure's Wireless Workbench 6 Software. The Ethernet ports also provide compatibility with the Dante digital networking system. Each of the four channels can provide up to 60 dB of adjustable gain. The dual antennas are capable of digital predictive switching diversity to reduce interference and signal dropouts. The unit can be rack mounted with the included rack hardware.
The dual Ethernet ports allow multiple units to share RF signal as well as be networked together and controlled via Shure's Wireless Workbench 6 Software. The Ethernet ports also provide compatibility with the Dante digital networking system. Each of the four channels can provide up to 60 dB of adjustable gain. The dual antennas are capable of digital predictive switching diversity to reduce interference and signal dropouts. The unit can be rack mounted with the included rack hardware.
| Receiver | |
| RF Input | Spurious Rejection: > 80 dB, Typical Connector Type: BNC Impedance: 50 Ohms Bias Voltage: 12 to 13 V DC, 150 mA Maximum, Per Antenna |
| Cascade Output | Connector Type: BNC (For Connecting of One Additional Receiver in the Same Band) Configuration: Unbalanced, Passive Impedance: 50 Ohms Insertion Loss: 0 dB |
| Audio Output | Gain Adjustment Range: -18 to 42 dB (in 1 dB Steps, Plus Mute Setting) 4x Balanced XLR Outputs Impedance: 100 Ohms Line Setting: 18 dBV Mic Setting: -12 dBV Mic/Line Switch: 30 dB Pad Phantom Power Protection: Yes |
| Network | Network Interface: Dual Port Ethernet 10/100 Mbps, 1 Gbps, Dante Digital Audio Network Addressing Capability: DHCP or Manual IP Address Maximum Cable Length: 328' (100 m) |
| Power Requirement | 100 to 240 V AC, 50 to 60 Hz, 0.32 A Maximum |
| Dimensions (H x W x D) | 1.7 x 18.9 x 10.7" (44 x 482 x 274 mm) |
| Weight | 7.6 lb (3.45 kg) |
